Your shopping cart is empty!
+1 (855) 251-0016 | sales@fuelcellstore.com
Categories
Reviews
CT GF100 Graphite Felt
Please note that this product has been discontinued and a limited amount of stock remains. Please contact us for availability.
CT GF100 is a graphite felt and great for high-temperature protection for vacuums and inert gas furnaces. It has a total thickness of 10 mm. CT is a great low-cost alternative to conventional graphite felt materials.
CT GF100 is available in 20 x 20 cm or 40 x 40 cm sheets at this time.
Advantages of CT Graphite Felt:
- Low thermal conductivity
- Dimensionally stable at elevated temperature
- High strength-to-weight ratio
- Puncture and abrasion resistance
- Acid and alkali resistance
- Welding sparks and spatter resistance
- Excellent flexibility
Applications That Can Benefit from CT Graphite Felt:
- Vanadium redox flow batteries where the graphite felt is usually used as the electrode material
- Other redox flow batteries such as non-aqueous redox flow batteries where the graphite felt is usually used as the electrode material
- Vacuum burn-out furnace, powder metallurgy equipments, heat treatment furnaces operating above 2000 degrees where the graphite felt can be used as the thermal insulation
- Electrode materials in water purification equipments
Gas Diffusion Layer Properties | |
Material Type | Graphite Felt |
Thickness | 10 mm (10,000 microns) |
Basic Weight (g/m²) | 500 - 800 |
Tensile Strength | 0.20 MPa |
Carbon Content (%) | >50 % |
Ash Content | <0.2 % |
Write a review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Related Products (27)