Categories

Lithium nickel cobalt aluminum oxide (NCA, LiNi0.8Co0.15Al0.05O2, BE-45) cathode powder

Product Code: 79080025

Price:
From $88.00

Available Options


* Grams:

Qty: - +
   - OR -   

Lithium nickel cobalt aluminum oxide (NCA, BE-45) cathode powder has the chemical formula of  LiNi0.8Co0.15Al0.05O2. NCA is a cathode material that provides higher capacity than LiCoO2 when both are charged to 4.2 / 4.3V. NCA-based batteries are most suited for use in moderate rate applications that require high energy density

Material Characteristics:
Generic Name: Lithium nickel cobalt aluminum oxide (NCA, LiNi0.8Co0.15Al0.05O2, BE-45)
Formula: LiNi0.8Co0.15Al0.05O2
Average Particle Size: 11 - 13 microns
Specific Surface Area: 0.4 - 0.5 m2/gram
 
Electrical Characteristics:
Nominal Voltage vs. Li/Li+: 3.7 V
Minimum Capacity: 170 mAh/gram
Experimental Capacity: ≥ 190 mAh/gram (3 - 4.2 V @ 0.1C)
 
Recommended Operating Conditions:
Maximum Charge Voltage: 4.3 V vs. Li/Li+
Maximum Charge Current: 2C
Cutoff Voltage for Discharge: 3.0 V vs. Li/Li+
Maximum Discharge Current: 2C
 
Precautions For Safe Storage and Handling:

Personal protective equipment should be used at all times. Avoid contact with eyes and skin. Ensure adequate ventilation and avoid inhalation of dusts. Wash hands thoroughly after handling. Store in a dry and well-ventilated place. Avoid moisture. Refer to SDS for complete safety information of this material.

NOTE: Fuel Cell Store believes that the information in this spec sheet is an accurate description of the typical use of the product. However, Fuel Cell Store disclaims any liability for incidental or consequential damages, which may result from the use of their products that are beyond its control. Researchers should use this information only as a supplement to other information gathered by them and should make independent judgment of suitability of this information to ensure proper use and protect the health and safety of employees. Therefore, it is the end user's responsibility to thoroughly test the product in their particular application to determine its performance, efficacy, and safety. Nothing contained herein is to be considered as permission or a recommendation to infringe any patent or any other intellectual right.

 
A typical lead time of 1-2 weeks to be expected for this product.

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Related Products (16)