Lithium manganese nickel cobalt oxide (NMC811, LiNi0.8Mn0.1Co0.1O2, CBP-56) cathode powder

Lithium manganese nickel cobalt oxide (NMC811, CBP-56) has the chemical formula of LiNi_0.8Mn_0.1Co_0.1O₂ where the atomic ratio of Ni:Mn:Co is set to 8:1:1 in order to have high specific energy density, favorable rate capability for discharge and charge cycles, and provide a relatively cost affordable cathode active material for lithium-ion battery applications, especially for electric vehicles and other applications such as field drones, e-VTOL, and consumer electronics.  This is a layered oxide material.

Particle size distribution and powder XRD of this Lithium manganese nickel cobalt oxide (NMC811, CBP-56) cathode material are provided below.

Personal protective equipment should be used at all times. Avoid contact with eyes and skin. Ensure adequate ventilation and avoid inhalation of dusts. Wash hands thoroughly after handling. Store in a dry and well-ventilated place. Avoid moisture. Refer to SDS for complete safety information of this material.

NOTE: Fuel Cell Store believes that the information in this spec sheet is an accurate description of the typical use of the product. However, Fuel Cell Store disclaims any liability for incidental or consequential damages, which may result from the use of their products that are beyond its control. Researchers should use this information only as a supplement to other information gathered by them and should make independent judgment of suitability of this information to ensure proper use and protect the health and safety of employees. Therefore, it is the end user's responsibility to thoroughly test the product in their particular application to determine its performance, efficacy, and safety. Nothing contained herein is to be considered as permission or a recommendation to infringe any patent or any other intellectual right.

Write a review